Anycubic Wash and Cure 3

The Anycubic Wash and Cure 3 device is the perfect tool for post-processing finished 3D models made from photopolymer resin. It is a powerful device capable of holding up to 3 liters of cleaning solution. Anycubic Wash and Cure 3 is fully compatible with 3D printers with display sizes not exceeding 7.3 inches.

New Model - Increased Capacity

Compared to earlier models of washers and dryers from Anycubic, the Wash and Cure 3 offers the following innovations:

Flexicure Gooseneck Lamp and New LED Placement

An entirely new Flexicure Gooseneck lamp design has been developed for the Anycubic Wash and Cure 3. As a result, the light flux's energy increased to 30,000 µW/cm2, with an exposure range of 1–3 cm. The positioning of UV LEDs and the light source has also been altered compared to previous models. Now, the model is illuminated more evenly, covering all surfaces, even those with complex geometries.

Stylish and Functional Design

The Anycubic Wash and Cure 3 features a simple, minimalist design. Despite this, the device can operate in two modes:

• Washing - 165 x 100 x 180 mm;
• Hanging Dry - 165 x 100 x 165 mm.

The washer's casing has an eye-pleasing pearl-white color, perfectly complementing the device's bright flip lid. Unlike earlier models, where the cleaning basket was made of stainless steel, the Wash and Cure 3 features a two-layer structure made of polypropylene. The basket is height adjustable, accommodating print platforms ranging from 5.9–7.3 inches. The 3D model can be washed directly in the basket or placed in the washer along with the print platform to minimize contact with the cleaning solution. In drying mode, the device automatically pauses operation when the lid is removed. This protects eyes from damage caused by ultraviolet radiation. The lid with UV protection blocks 99.95% of UV radiation (wavelength of 405 nm).

Wash and Cure 3 - Convenient and Quiet

The Anycubic Wash and Cure 3 features a user-friendly, intuitive control system. Switching between operating modes is done via several touch buttons, and the operation time can be precisely adjusted using a rotary knob. The adjustment range is from 1 to 30 minutes. The washer has a robust construction, which has also been optimized to reduce noise during operation. As such, you can comfortably place Wash and Cure 3 in a workshop or living room, without worrying about the device causing disturbances.

Package Contents

• Anycubic Wash & Cure 3.0;
• Washing container;
• Washing basket;
• Lamp with a flexible neck;
• Set of hex keys;
• 4 stands;
• Curing table;
• User manual;
• Power adapter.